In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! dogsrecommend.com/dog-mask The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are level and make certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you’ll have to do some sanding to make sure that it’s secure on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.